As a vendor, I needed something to display product at various heights from atop a basic table. This design uses just 3 elements, two of each, cut out of any 1/2" plywood or similar material. It goes up in seconds and breaks down for simple stacked, flat storage and transport. The shelves are 3 feet wide, 5.5" deep with 8" height clearance for each shelf.
I made 4 sets and use them on various tables at market shows. The slots are easily adjusted to match the thickness of your stock. Other dimensions can be changed, but be careful to check stability before making them too long or add a third support beam.
- Comments
