Full sized cat trees are too expensive!
The plan is to wrap the whole thing with 3/8" hemp rope secured with large staples so the cuts can be rough.
Jig saw the curves, maybe even get fancy and clean them up with a spokeshave or rough sandpaper.
The model is set up in groups if you want to make a break down version.
The top edges probably need mounting blocks if you go with 1/2" plywood instead of 3/4"
Materials:
One half sheet of plywood (4' x 4')
Seven six foot lengths of 2x4's
Lots of 3/8" hemp rope
Hammer in staples
... and about 50 screws
#Cat_Tree #DIY #Woodworking_Plans
- Comments
