Wall mount rack holds up to 6 rods horizontally.
Made with one 6' 1X4.
Can also be ceiling mounted, but designed for wall.
3 rods Left-to-Right, 3 rods Right-to-Left.
Rack is 24" top to bottom.
Special Features:
1. Most reel handles won't touch the wall the rack is mounted on
when the reel handle is on the wall side.
2. Reels don't hang down over the rod tips of the rods mounted
the "other" way.
3. Slot design for rod tip makes it extra easy to get tip into the hole from
4+ feet away.
4. If you have a rod with an extra large spinning reel (ie: extra long foot),
put the butt of the rod in a hole on the side of the rack where the top
hole is for a rod tip (in my design pic, it is the one on the right; the left
one in my pic has a rod butt hole as the top hole).
If you have Med-Lite/Lite rods that are less than ~76-77" long,
you'll probably want to mount the 2 racks only 48" apart.
Don't want spinning rods bending their tip spine the wrong way.
- Comments
