I designed this around an AMD-65 but it will probably fit other AK models with some modification. The model is separated into 2 groups, standard AK parts and 3d printed parts. The conversion trigger isn't modeled, but its a pretty simple setup, just cut the trigger bow off the rear trigger and use a standard trigger in the front. Then drill a hole in the hook arm of both triggers, the rear one weld in a 10-32 bolt. Then use a poly wrapped steel cable, wrap it around the rear trigger's screw and crimp, then thread it through the hole in the front trigger and crimp it. It takes a few tries to get the right cable length, but once you get it right and grease the cable it's pretty smooth for a bullpup. Also, that rear sight "carrier" is set up for an M14 sight, cause that's what I had laying around at the time. I made the sight carrier separate from the carry handle so the end user can print their own version that fits their sight of choice.
- Comments